And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.634
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.604
And
I accept adding "cowsay" to Additional Software
5.142
And
Additional Software is correctly configured for package "cowsay"
0.765
And
I shutdown Tails and wait for the computer to power off
8.442
And
I start Tails from USB drive "__internal" with network unplugged
41.204
And
I enable persistence
7.802
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
10.383
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.018
And
available upgrades have been checked
1.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.129
And
I can open the Additional Software configuration window from the notification
2.579
And
I shutdown Tails and wait for the computer to power off
17.805
And
I start Tails from USB drive "__internal" with network unplugged
39.368
And
I enable persistence
7.534
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
10.662
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.329
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.072
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081