And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.980
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.876
And
I accept adding "cowsay" to Additional Software
5.010
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
4.505
And
I start Tails from USB drive "__internal" with network unplugged
37.444
And
I enable persistence
10.027
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
10.570
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.260
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.040
And
available upgrades have been checked
2.184
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.412
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
17.801
And
I start Tails from USB drive "__internal" with network unplugged
37.079
And
I enable persistence
10.148
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073