And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.806
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.696
And
I accept adding "cowsay" to Additional Software
3.715
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
8.236
And
I start Tails from USB drive "__internal" with network unplugged
36.507
And
I enable persistence
8.960
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.270
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.017
And
available upgrades have been checked
2.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.473
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
22.971
And
I start Tails from USB drive "__internal" with network unplugged
36.016
And
I enable persistence
8.869
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073