And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.402
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.449
And
I accept adding "cowsay" to Additional Software
3.778
And
Additional Software is correctly configured for package "cowsay"
0.692
And
I shutdown Tails and wait for the computer to power off
4.404
And
I start Tails from USB drive "__internal" with network unplugged
35.824
And
I enable persistence
9.484
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.723
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.021
And
available upgrades have been checked
2.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.421
And
I can open the Additional Software configuration window from the notification
2.514
And
I shutdown Tails and wait for the computer to power off
17.597
And
I start Tails from USB drive "__internal" with network unplugged
35.104
And
I enable persistence
8.832
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.080
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065