And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.502
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.431
And
I accept adding "cowsay" to Additional Software
3.575
And
Additional Software is correctly configured for package "cowsay"
0.587
And
I shutdown Tails and wait for the computer to power off
8.084
And
I start Tails from USB drive "__internal" with network unplugged
35.258
And
I enable persistence
9.733
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.216
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.016
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.445
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
17.619
And
I start Tails from USB drive "__internal" with network unplugged
36.147
And
I enable persistence
8.918
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.913
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070