And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.578
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.740
And
I accept adding "cowsay" to Additional Software
5.113
And
Additional Software is correctly configured for package "cowsay"
0.740
And
I shutdown Tails and wait for the computer to power off
7.178
And
I start Tails from USB drive "__internal" with network unplugged
39.266
And
I enable persistence
10.809
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
13.009
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.022
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.105
And
I can open the Additional Software configuration window from the notification
2.653
And
I shutdown Tails and wait for the computer to power off
18.832
And
I start Tails from USB drive "__internal" with network unplugged
39.517
And
I enable persistence
11.877
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.915
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085