And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.160
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.532
And
I accept adding "cowsay" to Additional Software
5.048
And
Additional Software is correctly configured for package "cowsay"
0.644
And
I shutdown Tails and wait for the computer to power off
6.805
And
I start Tails from USB drive "__internal" with network unplugged
35.733
And
I enable persistence
9.014
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.508
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.016
And
available upgrades have been checked
1.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.995
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
17.618
And
I start Tails from USB drive "__internal" with network unplugged
36.145
And
I enable persistence
8.683
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.136
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074