And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.090
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.021
And
I accept adding "cowsay" to Additional Software
4.973
And
Additional Software is correctly configured for package "cowsay"
0.674
And
I shutdown Tails and wait for the computer to power off
8.285
And
I start Tails from USB drive "__internal" with network unplugged
37.646
And
I enable persistence
11.095
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.386
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.562
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.040
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.567
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
22.036
And
I start Tails from USB drive "__internal" with network unplugged
37.720
And
I enable persistence
10.225
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.721
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070