And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.324
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.642
And
I accept adding "cowsay" to Additional Software
4.885
And
Additional Software is correctly configured for package "cowsay"
0.658
And
I shutdown Tails and wait for the computer to power off
8.040
And
I start Tails from USB drive "__internal" with network unplugged
38.688
And
I enable persistence
6.528
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
11.306
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.020
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.532
And
I can open the Additional Software configuration window from the notification
2.623
And
I shutdown Tails and wait for the computer to power off
22.918
And
I start Tails from USB drive "__internal" with network unplugged
39.152
And
I enable persistence
7.042
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.924
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.527
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062