And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.177
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.599
And
I accept adding "cowsay" to Additional Software
3.749
And
Additional Software is correctly configured for package "cowsay"
0.637
And
I shutdown Tails and wait for the computer to power off
8.043
And
I start Tails from USB drive "__internal" with network unplugged
36.776
And
I enable persistence
9.033
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
9.529
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.017
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.459
And
I can open the Additional Software configuration window from the notification
2.514
And
I shutdown Tails and wait for the computer to power off
22.861
And
I start Tails from USB drive "__internal" with network unplugged
35.892
And
I enable persistence
10.003
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.684
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098