And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.522
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.910
And
I accept adding "cowsay" to Additional Software
3.681
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
8.380
And
I start Tails from USB drive "__internal" with network unplugged
38.010
And
I enable persistence
10.535
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
11.191
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.697
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.566
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
22.325
And
I start Tails from USB drive "__internal" with network unplugged
37.644
And
I enable persistence
11.501
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.030
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.612
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093