And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.491
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.411
And
I accept adding "cowsay" to Additional Software
3.569
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
4.128
And
I start Tails from USB drive "__internal" with network unplugged
36.404
And
I enable persistence
9.995
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.531
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.015
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.659
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
13.106
And
I start Tails from USB drive "__internal" with network unplugged
35.946
And
I enable persistence
8.603
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.248
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065