And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.038
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.815
And
I accept adding "cowsay" to Additional Software
3.575
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
2.694
And
I start Tails from USB drive "__internal" with network unplugged
35.639
And
I enable persistence
8.924
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
9.840
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.013
And
available upgrades have been checked
1.124
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.409
And
I can open the Additional Software configuration window from the notification
2.527
And
I shutdown Tails and wait for the computer to power off
22.293
And
I start Tails from USB drive "__internal" with network unplugged
35.290
And
I enable persistence
9.822
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
9.961
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055