And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.720
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.859
And
I accept adding "cowsay" to Additional Software
5.128
And
Additional Software is correctly configured for package "cowsay"
0.669
And
I shutdown Tails and wait for the computer to power off
8.017
And
I start Tails from USB drive "__internal" with network unplugged
37.487
And
I enable persistence
10.781
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
10.066
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.015
And
available upgrades have been checked
2.184
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.468
And
I can open the Additional Software configuration window from the notification
2.539
And
I shutdown Tails and wait for the computer to power off
22.966
And
I start Tails from USB drive "__internal" with network unplugged
37.818
And
I enable persistence
10.254
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.273
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.520
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064