And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.429
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.447
And
I accept adding "cowsay" to Additional Software
3.621
And
Additional Software is correctly configured for package "cowsay"
0.559
And
I shutdown Tails and wait for the computer to power off
7.943
And
I start Tails from USB drive "__internal" with network unplugged
35.240
And
I enable persistence
9.655
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
9.615
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.015
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.072
And
I can open the Additional Software configuration window from the notification
2.634
And
I shutdown Tails and wait for the computer to power off
22.103
And
I start Tails from USB drive "__internal" with network unplugged
34.892
And
I enable persistence
8.787
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.548
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.012
Then
the Additional Software upgrade service has started
0.082
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045