And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.406
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.869
And
I accept adding "cowsay" to Additional Software
3.753
And
Additional Software is correctly configured for package "cowsay"
0.585
And
I shutdown Tails and wait for the computer to power off
7.901
And
I start Tails from USB drive "__internal" with network unplugged
35.304
And
I enable persistence
9.170
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.347
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.021
And
available upgrades have been checked
2.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.395
And
I can open the Additional Software configuration window from the notification
2.498
And
I shutdown Tails and wait for the computer to power off
18.452
And
I start Tails from USB drive "__internal" with network unplugged
35.936
And
I enable persistence
9.841
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.061
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.552
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054