And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.976
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.910
And
I accept adding "cowsay" to Additional Software
3.658
And
Additional Software is correctly configured for package "cowsay"
0.567
And
I shutdown Tails and wait for the computer to power off
7.743
And
I start Tails from USB drive "__internal" with network unplugged
35.644
And
I enable persistence
9.362
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.549
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.483
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
1.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.461
And
I can open the Additional Software configuration window from the notification
2.514
And
I shutdown Tails and wait for the computer to power off
13.070
And
I start Tails from USB drive "__internal" with network unplugged
35.373
And
I enable persistence
8.787
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.156
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067