And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.005
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.659
And
I accept adding "cowsay" to Additional Software
3.616
And
Additional Software is correctly configured for package "cowsay"
0.618
And
I shutdown Tails and wait for the computer to power off
7.994
And
I start Tails from USB drive "__internal" with network unplugged
36.220
And
I enable persistence
9.887
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.732
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.013
And
available upgrades have been checked
2.223
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.500
And
I can open the Additional Software configuration window from the notification
2.603
And
I shutdown Tails and wait for the computer to power off
13.111
And
I start Tails from USB drive "__internal" with network unplugged
36.517
And
I enable persistence
9.146
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.267
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059