And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.001
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.814
And
I accept adding "cowsay" to Additional Software
3.786
And
Additional Software is correctly configured for package "cowsay"
0.615
And
I shutdown Tails and wait for the computer to power off
7.913
And
I start Tails from USB drive "__internal" with network unplugged
35.400
And
I enable persistence
9.858
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.242
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.015
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.002
And
I can open the Additional Software configuration window from the notification
2.503
And
I shutdown Tails and wait for the computer to power off
18.568
And
I start Tails from USB drive "__internal" with network unplugged
36.734
And
I enable persistence
9.839
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.801
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058