And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.152
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.806
And
I accept adding "cowsay" to Additional Software
3.739
And
Additional Software is correctly configured for package "cowsay"
0.650
And
I shutdown Tails and wait for the computer to power off
4.218
And
I start Tails from USB drive "__internal" with network unplugged
35.785
And
I enable persistence
8.898
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.020
And
available upgrades have been checked
2.154
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.387
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
17.086
And
I start Tails from USB drive "__internal" with network unplugged
35.426
And
I enable persistence
8.801
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.046
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058