And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.294
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.513
And
I accept adding "cowsay" to Additional Software
3.646
And
Additional Software is correctly configured for package "cowsay"
0.549
And
I shutdown Tails and wait for the computer to power off
7.809
And
I start Tails from USB drive "__internal" with network unplugged
35.319
And
I enable persistence
9.096
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.481
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.018
And
available upgrades have been checked
1.117
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.923
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
17.030
And
I start Tails from USB drive "__internal" with network unplugged
35.272
And
I enable persistence
9.214
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.724
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.045
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074