And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.949
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.636
And
I accept adding "cowsay" to Additional Software
3.834
And
Additional Software is correctly configured for package "cowsay"
0.647
And
I shutdown Tails and wait for the computer to power off
7.953
And
I start Tails from USB drive "__internal" with network unplugged
36.474
And
I enable persistence
8.774
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
9.511
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.018
And
available upgrades have been checked
2.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.455
And
I can open the Additional Software configuration window from the notification
2.513
And
I shutdown Tails and wait for the computer to power off
13.109
And
I start Tails from USB drive "__internal" with network unplugged
36.010
And
I enable persistence
9.058
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.042
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057