And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.089
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.545
And
I accept adding "cowsay" to Additional Software
3.652
And
Additional Software is correctly configured for package "cowsay"
0.600
And
I shutdown Tails and wait for the computer to power off
4.174
And
I start Tails from USB drive "__internal" with network unplugged
36.207
And
I enable persistence
6.536
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.209
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.039
And
available upgrades have been checked
2.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.466
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
13.087
And
I start Tails from USB drive "__internal" with network unplugged
34.544
And
I enable persistence
5.373
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.330
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049