And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.301
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.950
And
I accept adding "cowsay" to Additional Software
3.661
And
Additional Software is correctly configured for package "cowsay"
0.782
And
I shutdown Tails and wait for the computer to power off
4.082
And
I start Tails from USB drive "__internal" with network unplugged
36.862
And
I enable persistence
10.252
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
9.243
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.013
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.966
And
I can open the Additional Software configuration window from the notification
2.606
And
I shutdown Tails and wait for the computer to power off
13.553
And
I start Tails from USB drive "__internal" with network unplugged
36.979
And
I enable persistence
10.399
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.485
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061