And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.938
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.965
And
I accept adding "cowsay" to Additional Software
4.858
And
Additional Software is correctly configured for package "cowsay"
0.626
And
I shutdown Tails and wait for the computer to power off
4.037
And
I start Tails from USB drive "__internal" with network unplugged
36.075
And
I enable persistence
8.481
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
8.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.023
And
available upgrades have been checked
2.191
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.420
And
I can open the Additional Software configuration window from the notification
2.517
And
I shutdown Tails and wait for the computer to power off
4.021
And
I start Tails from USB drive "__internal" with network unplugged
36.734
And
I enable persistence
9.389
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.557
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068