And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.949
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.597
And
I accept adding "cowsay" to Additional Software
3.675
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
4.051
And
I start Tails from USB drive "__internal" with network unplugged
37.096
And
I enable persistence
9.342
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.201
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
3.234
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.420
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
18.406
And
I start Tails from USB drive "__internal" with network unplugged
36.475
And
I enable persistence
9.517
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.296
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066