And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.619
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.982
And
I accept adding "cowsay" to Additional Software
4.933
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
8.296
And
I start Tails from USB drive "__internal" with network unplugged
38.077
And
I enable persistence
6.979
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
12.439
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.270
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.018
And
available upgrades have been checked
1.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.993
And
I can open the Additional Software configuration window from the notification
2.552
And
I shutdown Tails and wait for the computer to power off
18.195
And
I start Tails from USB drive "__internal" with network unplugged
38.547
And
I enable persistence
5.551
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
12.913
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.102
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084