And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.210
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.720
And
I accept adding "cowsay" to Additional Software
3.568
And
Additional Software is correctly configured for package "cowsay"
0.553
And
I shutdown Tails and wait for the computer to power off
4.274
And
I start Tails from USB drive "__internal" with network unplugged
36.892
And
I enable persistence
8.671
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.518
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.015
And
available upgrades have been checked
1.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.494
And
I can open the Additional Software configuration window from the notification
2.535
And
I shutdown Tails and wait for the computer to power off
18.347
And
I start Tails from USB drive "__internal" with network unplugged
36.589
And
I enable persistence
9.198
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.153
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050