And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.294
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.820
And
I accept adding "cowsay" to Additional Software
3.582
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
3.953
And
I start Tails from USB drive "__internal" with network unplugged
36.224
And
I enable persistence
9.263
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
8.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.019
And
available upgrades have been checked
2.170
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.459
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
18.471
And
I start Tails from USB drive "__internal" with network unplugged
36.298
And
I enable persistence
8.938
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.981
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060