And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.423
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.428
And
I accept adding "cowsay" to Additional Software
5.156
And
Additional Software is correctly configured for package "cowsay"
0.536
And
I shutdown Tails and wait for the computer to power off
2.536
And
I start Tails from USB drive "__internal" with network unplugged
33.499
And
I enable persistence
11.035
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
7.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.030
And
available upgrades have been checked
1.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.776
And
I can open the Additional Software configuration window from the notification
2.414
And
I shutdown Tails and wait for the computer to power off
12.649
And
I start Tails from USB drive "__internal" with network unplugged
33.362
And
I enable persistence
11.601
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050