And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.445
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.378
And
I accept adding "cowsay" to Additional Software
4.807
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
3.892
And
I start Tails from USB drive "__internal" with network unplugged
35.268
And
I enable persistence
11.258
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.056
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.073
And
I can open the Additional Software configuration window from the notification
2.658
And
I shutdown Tails and wait for the computer to power off
17.998
And
I start Tails from USB drive "__internal" with network unplugged
34.004
And
I enable persistence
11.430
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.128
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.394
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051