And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.181
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.488
And
I accept adding "cowsay" to Additional Software
4.896
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
2.598
And
I start Tails from USB drive "__internal" with network unplugged
32.996
And
I enable persistence
11.832
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
6.655
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.033
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.809
And
I can open the Additional Software configuration window from the notification
2.542
And
I shutdown Tails and wait for the computer to power off
12.599
And
I start Tails from USB drive "__internal" with network unplugged
33.982
And
I enable persistence
10.865
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
8.234
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.030
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050