And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.232
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.654
And
I accept adding "cowsay" to Additional Software
4.881
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
7.931
And
I start Tails from USB drive "__internal" with network unplugged
36.236
And
I enable persistence
5.534
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
9.948
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.015
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.549
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
18.533
And
I start Tails from USB drive "__internal" with network unplugged
36.269
And
I enable persistence
5.707
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.898
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053