And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.627
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.767
And
I accept adding "cowsay" to Additional Software
4.168
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
2.580
And
I start Tails from USB drive "__internal" with network unplugged
33.835
And
I enable persistence
11.471
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.112
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.132
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.037
And
available upgrades have been checked
1.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.817
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
17.594
And
I start Tails from USB drive "__internal" with network unplugged
34.604
And
I enable persistence
9.973
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.608
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.043