And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.250
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.593
And
I accept adding "cowsay" to Additional Software
3.896
And
Additional Software is correctly configured for package "cowsay"
0.450
And
I shutdown Tails and wait for the computer to power off
2.558
And
I start Tails from USB drive "__internal" with network unplugged
32.069
And
I enable persistence
10.379
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
7.324
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.030
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.919
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
17.990
And
I start Tails from USB drive "__internal" with network unplugged
32.439
And
I enable persistence
10.556
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.643
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042