And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.228
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.390
And
I accept adding "cowsay" to Additional Software
4.816
And
Additional Software is correctly configured for package "cowsay"
0.655
And
I shutdown Tails and wait for the computer to power off
8.720
And
I start Tails from USB drive "__internal" with network unplugged
38.879
And
I enable persistence
6.597
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
11.479
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.013
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.485
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
17.354
And
I start Tails from USB drive "__internal" with network unplugged
37.642
And
I enable persistence
6.536
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
11.713
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.247
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061