And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.474
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.525
And
I accept adding "cowsay" to Additional Software
3.647
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
7.947
And
I start Tails from USB drive "__internal" with network unplugged
36.022
And
I enable persistence
5.765
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
9.130
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.012
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.015
And
I can open the Additional Software configuration window from the notification
2.545
And
I shutdown Tails and wait for the computer to power off
13.137
And
I start Tails from USB drive "__internal" with network unplugged
35.981
And
I enable persistence
5.498
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.275
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055