And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.419
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.971
And
I accept adding "cowsay" to Additional Software
5.111
And
Additional Software is correctly configured for package "cowsay"
0.675
And
I shutdown Tails and wait for the computer to power off
8.007
And
I start Tails from USB drive "__internal" with network unplugged
38.558
And
I enable persistence
6.495
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
11.132
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.565
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.017
And
available upgrades have been checked
1.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.411
And
I can open the Additional Software configuration window from the notification
2.501
And
I shutdown Tails and wait for the computer to power off
22.696
And
I start Tails from USB drive "__internal" with network unplugged
37.734
And
I enable persistence
6.645
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.764
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.208
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.088
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060