And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.230
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.106
And
I accept adding "cowsay" to Additional Software
3.696
And
Additional Software is correctly configured for package "cowsay"
0.596
And
I shutdown Tails and wait for the computer to power off
3.991
And
I start Tails from USB drive "__internal" with network unplugged
34.669
And
I enable persistence
5.394
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.808
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.014
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.421
And
I can open the Additional Software configuration window from the notification
2.508
And
I shutdown Tails and wait for the computer to power off
18.328
And
I start Tails from USB drive "__internal" with network unplugged
35.965
And
I enable persistence
6.395
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.764
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.096
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051