And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.822
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.586
And
I accept adding "cowsay" to Additional Software
4.814
And
Additional Software is correctly configured for package "cowsay"
0.668
And
I shutdown Tails and wait for the computer to power off
4.225
And
I start Tails from USB drive "__internal" with network unplugged
36.047
And
I enable persistence
7.071
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.114
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.014
And
available upgrades have been checked
3.226
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.502
And
I can open the Additional Software configuration window from the notification
2.585
And
I shutdown Tails and wait for the computer to power off
13.290
And
I start Tails from USB drive "__internal" with network unplugged
37.917
And
I enable persistence
6.277
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
10.336
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.093
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063