And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.181
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.766
And
I accept adding "cowsay" to Additional Software
3.547
And
Additional Software is correctly configured for package "cowsay"
0.722
And
I shutdown Tails and wait for the computer to power off
4.182
And
I start Tails from USB drive "__internal" with network unplugged
36.049
And
I enable persistence
10.125
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.118
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.020
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.007
And
I can open the Additional Software configuration window from the notification
2.499
And
I shutdown Tails and wait for the computer to power off
17.402
And
I start Tails from USB drive "__internal" with network unplugged
35.951
And
I enable persistence
9.226
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.250
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076