And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.377
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.420
And
I accept adding "cowsay" to Additional Software
3.604
And
Additional Software is correctly configured for package "cowsay"
0.642
And
I shutdown Tails and wait for the computer to power off
3.935
And
I start Tails from USB drive "__internal" with network unplugged
35.704
And
I enable persistence
5.322
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.239
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.019
And
available upgrades have been checked
3.178
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.399
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
13.167
And
I start Tails from USB drive "__internal" with network unplugged
36.298
And
I enable persistence
5.574
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.642
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060