And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.705
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.624
And
I accept adding "cowsay" to Additional Software
4.870
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
4.126
And
I start Tails from USB drive "__internal" with network unplugged
37.073
And
I enable persistence
10.092
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.518
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.020
And
available upgrades have been checked
1.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.529
And
I can open the Additional Software configuration window from the notification
2.512
And
I shutdown Tails and wait for the computer to power off
18.574
And
I start Tails from USB drive "__internal" with network unplugged
36.822
And
I enable persistence
9.800
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.195
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076