And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.099
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.613
And
I accept adding "cowsay" to Additional Software
3.716
And
Additional Software is correctly configured for package "cowsay"
0.619
And
I shutdown Tails and wait for the computer to power off
3.993
And
I start Tails from USB drive "__internal" with network unplugged
35.431
And
I enable persistence
9.903
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.443
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.019
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.456
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
13.014
And
I start Tails from USB drive "__internal" with network unplugged
36.850
And
I enable persistence
9.014
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.929
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075