And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.941
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.738
And
I accept adding "cowsay" to Additional Software
4.769
And
Additional Software is correctly configured for package "cowsay"
0.632
And
I shutdown Tails and wait for the computer to power off
4.347
And
I start Tails from USB drive "__internal" with network unplugged
38.280
And
I enable persistence
10.543
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.014
And
available upgrades have been checked
1.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.542
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
18.727
And
I start Tails from USB drive "__internal" with network unplugged
36.459
And
I enable persistence
8.920
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052