And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.869
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.858
And
I accept adding "cowsay" to Additional Software
5.059
And
Additional Software is correctly configured for package "cowsay"
0.758
And
I shutdown Tails and wait for the computer to power off
4.142
And
I start Tails from USB drive "__internal" with network unplugged
36.885
And
I enable persistence
6.731
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.236
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.023
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.567
And
I can open the Additional Software configuration window from the notification
2.608
And
I shutdown Tails and wait for the computer to power off
18.800
And
I start Tails from USB drive "__internal" with network unplugged
37.428
And
I enable persistence
5.757
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.835
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060