And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.607
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.949
And
I accept adding "cowsay" to Additional Software
3.654
And
Additional Software is correctly configured for package "cowsay"
0.648
And
I shutdown Tails and wait for the computer to power off
3.937
And
I start Tails from USB drive "__internal" with network unplugged
35.541
And
I enable persistence
9.339
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
10.085
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.015
And
available upgrades have been checked
3.242
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.436
And
I can open the Additional Software configuration window from the notification
2.524
And
I shutdown Tails and wait for the computer to power off
13.202
And
I start Tails from USB drive "__internal" with network unplugged
35.710
And
I enable persistence
9.100
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.937
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060