And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.287
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.534
And
I accept adding "cowsay" to Additional Software
3.720
And
Additional Software is correctly configured for package "cowsay"
0.781
And
I shutdown Tails and wait for the computer to power off
4.028
And
I start Tails from USB drive "__internal" with network unplugged
37.893
And
I enable persistence
5.913
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.891
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.308
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.018
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.035
And
I can open the Additional Software configuration window from the notification
2.517
And
I shutdown Tails and wait for the computer to power off
13.556
And
I start Tails from USB drive "__internal" with network unplugged
37.749
And
I enable persistence
5.888
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.466
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078