And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.606
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.663
And
I accept adding "cowsay" to Additional Software
4.003
And
Additional Software is correctly configured for package "cowsay"
0.425
And
I shutdown Tails and wait for the computer to power off
2.526
And
I start Tails from USB drive "__internal" with network unplugged
31.261
And
I enable persistence
9.863
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
6.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.397
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.037
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.777
And
I can open the Additional Software configuration window from the notification
2.556
And
I shutdown Tails and wait for the computer to power off
17.554
And
I start Tails from USB drive "__internal" with network unplugged
32.322
And
I enable persistence
10.415
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.361
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.130
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077