And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.933
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.126
And
I accept adding "cowsay" to Additional Software
3.579
And
Additional Software is correctly configured for package "cowsay"
0.734
And
I shutdown Tails and wait for the computer to power off
4.014
And
I start Tails from USB drive "__internal" with network unplugged
35.937
And
I enable persistence
8.626
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
8.783
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.021
And
available upgrades have been checked
2.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.472
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
13.048
And
I start Tails from USB drive "__internal" with network unplugged
35.447
And
I enable persistence
9.093
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
9.530
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055